Write At | Command Station V104

Here's an example sketch that demonstrates how to use the WriteAt command:

// Write another byte to EEPROM location 10 EEPROM.writeAt(10, 20);

delay(1000); } In this example, we write the values 10 and 20 to EEPROM locations 0 and 10, respectively. Then, we read the data from these locations and print it to the serial console. write at command station v104

void setup() { // Write a byte to EEPROM location 0 EEPROM.writeAt(0, 10);

// Read the data from EEPROM location 10 data = EEPROM.read(10); Serial.print("Data at location 10: "); Serial.println(data); Here's an example sketch that demonstrates how to

Serial.begin(9600); }

#include <EEPROM.h>

void loop() { // Read the data from EEPROM location 0 byte data = EEPROM.read(0); Serial.print("Data at location 0: "); Serial.println(data);